(936) 396-3101 |
190 Hwy 39 S | Normangee, TX 77871
 
Land Pride
Land Pride

2012 Land Pride RC3615

Model Overview & Specs

Deck
Deck SizeCutting Width: 15 ft. (4.572 m)

The Land Pride RC3615 Series Rotary Cutter is ideal for maintaining grazing areas for horses or mowing the wide open spaces close to town. The 15' cutting width and ability to cut weeds and brush up to 2.5" in diameter make them well suited for these applications. The 36 Series offers a pull-type self leveling tongue with a clevis hitch for attachment to 50-160 hp tractors, and features a Cat. 5 main driveline. Safety guards around the cutter are offered in either chain or rubber.

  • Surpassed rugged industry standards: All Land Pride Rotary Cutters have been designed and tested and meet rigorous voluntary testing procedures.
  • Factory assembled: Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
  • 160 HP Divider gearbox and 110 HP wing gearboxes: A rugged heavy built gearboxs capable of handling heavy cutting applications.
  • Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
  • Smooth Top Design: Allows for easy cleaning of deck.
  • Low tongue weight: Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
  • Narrow tongue construction: Allows for a tighter turning radius.
  • Input Driveline: Cat. 5 CV: Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
  • Wing driveline: Cat. 4 with slip-clutch: Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load instead of twisting the driveline. (Optional Cat. 5 driveline is available.)
  • Slip-clutch drivelines: Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.
  • High Blade tip speed: Allows clean cutting of material.
  • 6" Blade overlap: Eliminates skipping during turns.
  • Left wing rotates clockwise: Better discharge of material. Picks up tractor tracks.
  • 3/16" Round stump jumper: Standard thick stump jumper material keeps damage to a minimum.
  • 1/4" Sidewall thickness: Increased thickness reduces damage from objects being thrown into deck sidewalls.
  • Self-leveling hitch: Reduces drawbar wear by keeping hitch level while going through ditches.
  • Hinged wing sections: Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and hollows can cause uneven cutting.
  • 1" Solid hinge rods: Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
  • Wing transport locks: Wing transport locks securely hold the wings in the folded position in case of hydraulic failure.
  • Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain.
  • 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
  • Spring cushioned center-axle: Protects unit from bumps and ground shock.
  • Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing entire axle assembly.
  • Laminated tires: Eliminates flats.
  • Airplane tires without foam filling: Give better cushion while transporting.
  • Airplane tires with foam filling: Give better cushion while transporting and can’t go flat.
  • Double swivel hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
  • Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Specifications
  • Min. PTO Horse Power: 50
  • Gearbox Horsepower: 540 RPM; 160 HP Divider, 110 HP Center & Wings
  • Gearbox Lubrication: Gear Lube 80-90W EP
  • Gearbox Capacity: Splitter: 3.5 pints; Center deck & Wings: 6 pints
  • Cutting Capacity: 2 1/2 in.
  • Machine Weight: Hitch weight = 1,300 lbs.; Total weight = 3,730 lbs.
  • Blade Tip Speed At 540 RPM: Center Blades = 15,268 FPM & Wing Blades = 15,000 FPM
  • Hitch Types: Standard Clevis, Double Swivel Clevis, Bar-Tite, Ball or Pintle Hitch
  • Hitch Jack: Standard (5,000 lbs.)
  • Cutting Width: 15 ft. (4.572m)
  • Overall Width: 15 ft.-9 in. (4.801m)
  • Minimum Transport Width: 7 ft.-11 3/4 in. (2.432m)
  • Overall Length: 15 ft.-6 in. (4.724m) With center deck raised fully up
  • Deck Height: 12 in.
  • Cutting Height: 2 in. - 14 in.
  • Lift Hydraulics: 3 in. x 8 in. hydraulic cylinder, hoses, fittings & stroke control spacers
  • Wing Hydraulics: 2 1/2 in. x 12 in. hydraulic cylinders, hoses & fittings
  • Wing Transport Protection: Wing Transport Locks
  • Deck Material Thickness: 10 gauge
  • Side Skirt Thickness: 1/4 in.
  • Skid Shoes: Wing Deck: 1 Replaceable shoe per wing; Center Deck: 2 Replaceable shoes
  • Blades - 6 (2 per Carrier): 1/2 in. x 4 in. Heat Treated Free Swinging Alloy Steel with Uplift
  • Blade Overlap: 6 in.
  • Blade Bolt: Keyed with hardened flat washer & lock nut
  • Stump Jumper / Blade Holder: 3/16 in. Thick round dish shaped pan, reinforced with 1 in. x 4 in. blade bar
  • Front & Rear Guards: Optional rubber, single row chain or dual row chain
  • Input Driveline 540 PTO: ASAE Category 5 with constant velocity u-joint or conventional (non-cv) u-joint
  • Intermediate & Wing Drivelines: Standard - Category 4 with Slip-Clutch
  • Wheel Options: 6 in. x 21 in. Laminated tires or 24 in. x 7.7 in. recap aircraft tires with foam filling or 29 in. x 16 ply aircraft tires without foam filling
  • Number of Wheels: 6 - Wheels: 4 on transport axle and 1 on each wing axle
  • Transport Axle: Spring-cushioned on center transport axle
  • Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4 in. shafts
  • Colors: Standard color: Beige; Optional colors: Red, Green or Orange

Compare Models

 






   
Year2012  
ManufacturerLand Pride  
ModelRC3615  
Style Tow Behind  
Deck
Deck SizeCutting Width: 15 ft. (4.572 m)  
Discharge Type   
Engine
Engine Manufacturer   
Horse Power   
Engine Type   
Displacement   
General
Transmission   
Wheel Size   
Fuel Capacity   

Save & Email Listing

Can't see this image?  Try refreshing by clicking on the refresh icon.Refresh CAPTCHA

Your privacy is important to us. We will not contact you without your consent to receive offers, other than to provide you with the link to your saved listing.

Featured Products
Used Equipment
Hours
M-F8:00 a.m.5:00 p.m.
Sat8:00 a.m.Noon
SunClosed
Factory Promotions
Select Brand