2024 Kubota BR510
Call for Price
Key Features
Availability
Brochure
Year2024
MakeKubota
ModelBR510
Product Features
Description
The Kubota-branded line of BR Series Breakers is ideal for compact excavators and skid steers or compact track loaders. The BR510 are ideal for demolition, frozen ground, and as a rental tool where optimum power and breaking efficiency is required. Six models are available to fit a variety of powered units. Only available through Kubota Dealers.
Features & Benefits
- Oil fired: Oil fired units do not have a bladder of nitrogen that has to be re-filled.
- No tie rods: Tie rods can become loose and need tightening periodically
- Service interval = 1000 hrs.: The Hydraulic Breaker is built tough to last a long time between service intervals.
- Higher impact rate, Up to 2600 bpm (bumps per minute): Able to complete the job faster than most machines.
- All models operate quiet: Each model has a lower operating noise level than the competitors.
- Standard tools included: 1 moil point and 1 chisel point: All hammers are shipped with two of the most heavily used tools to ensure the hammer is equipped to work.
- BR510, BR560, & BR860 models have CBE (Constant blow energy): Constant energy throughout a given oil flow range means less drop off in effective energy with lower oil flow and pressures.
- Models with CBE span a larger hydraulic range: Fewer adjustments between power machines.
Breaker Specifications & Capacities
- Frequency range: 600-1800 bpm
- Oil flow range: 9-24 gpm (35-90 Lpm)
- Operating pressure: 1300-2030 psi (90-140 bar)
- Pressure relief setting minimum: 2030-2900 psi (140-200 bar)
- Pressure relief setting maximum: 3190 psi (220 bar)
- Back pressure, maximum: 290 psi (20 bar)
- Operating weight: 610 lbs (275 kg)
- Tool shank diameter: 2.83 in (72 mm)
- Mini-excavator, tractor backhoe weight: 3.7-8.8 ton (3.4-8.0 m ton)
- Skid steer, robot weight: 2.1-3.95 ton (1.9-3.6 m ton)
Tool Specifications - Chisel Tool
- Part number: BJ631SK
- Length: 25 5/8 in (650 mm)
- Weight: 42 lbs (19 kg)
Tool Specifications - Moil Tool
- Part number: BJ633SK
- Length: 25 5/8 in (650 mm)
- Weight: 42 lbs (19 kg)
Tool Specifications - Spade, Parallel
- Part number: BJ635SK
- Length: 25 5/8 in (650 mm)
- Weight: 40 lbs (18 kg)
- Base width or diameter: 6 in (150 mm)
Tool Specifications - Spade, Transverse
- Part number: BJ636SK
- Length: 125 5/8 in (650 mm)
- Base width or diameter: 6 in (150 mm)
- Weight: 40 lbs (18 kg)
Tool Specifications - Compact Plate
- Part number: BJ637SK
- Base width or diameter: 13 in (330 mm)
- Length: 20 1/8 in (510 mm)
- Weight: 112 lbs (51 kg)
General
| Weight | 610 lb. (275 kg) |
| Tool Diameter | 2.83 in. (72 mm) |
| Impact Frequency Range | 600-1800 bpm |
| Oil Flow Range | 9-24 gpm (35-90 Lpm) |
| Operating Pressure Range | 2030-2900 psi (140-200 bar) |
