Top

2024 Land Pride RC5020

Call for Price

Key Features

Availability Brochure

Year2024

MakeLand Pride

ModelRC5020

Product Features

Description

The heavy duty RC5020 Serie Rotary Cutters are designed and built by Land Pride to provide excellent cutting performance on gently sloping or slightly contoured right of ways, roadsides, pastures, setaside acres, or for residue in row crop fields. The 20' cutting width, 2" to 14" cutting height and ability to cut weeds and brush up to 3" in diameter make them well suited for these applications. Both models offer pull-type self-leveling clevis hitches for attachment to 90-250 hp tractors. They also offer various safety guard selections making them an excellent choice for state and municipal mowing applications.

Features

Surpassed industry safety standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ISO & ASABE.
Factory assembled: Saves customer set-up time and money. Fully welded top deck Fully welded deck adds strength.
7 Year gearbox warranty: Shows confidence in our gearboxes.
225 hp (167.8 kw) spindle gearboxes: Rugged heavy built gearboxes capable of handling heavy cutting applications.
Gearbox seal protection Gearbox bottom seal protection for longer bearing life.
Input driveline: Cat. 6 CV
Fits wide range of tractors including high horsepower tractors.
Holds up to shock loads and harsh mowing conditions.
Star profile drivelines Star profile spreads load out to many points on the shaft. More apt to resist bending
Easy greasable drivelines Drivelines have access holes for greasing the U-joints and to grease inner profiles.
and twisting under shock loads and harsh mowing conditions.
4 Plate slip-clutch Protects drivelines and gearboxes by slipping clutches rather than twisting the
driveline when impacts are encountered.
High blade tip speed
540 rpm: Center: 17,377 fpm (88.3 mps), Wings: 17,329 fpm (88 mps) Allows for a clean cut of material and even distribution.
6" (15.2 cm) Blade overlap: Generous blade overlap eliminates skipping, especially in turns.
High cutting capacity: Can cut brushy areas with saplings up to 3" (7.6 cm).
Left wing rotates counterclockwise: Better discharge of material. Picks up tractor tracks.
10 1/2" (26.7 cm) Deck height: Handles heavy cutting, which reduces balling-up of cut material under the deck.
3/16" (5 mm) stump jumper (optional) backed with a 1" (2.5 cm) thick mounting bar: Heavy round stump jumper with bottom gearbox seal protector. Can hold up to tough conditions.
10 gauge (3.4 mm) double deck: Heavy enough to handle conditions but not weigh unit down.
Self-leveling pull-type hitch (optional): Reduces drawbar wear by keeping hitch level while going through ditches.
LED Signal lights: LED lights are bright, long lasting, and resistant to vibration, unlike incandescent counterparts.
Hinged wing sections: Allow cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
1" (2.5 cm) Solid hinge rods: Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in the hinge area itself.
Wing transport locks: Safety feature. Holds wing sections up in case of hydraulic pressure loss.
1" (2.5 cm) Enclosed front to rear dual leveling rods: Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
Drain holes in wheel rims: Allows water to drain from wheels mounted on the folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
5" (12.7 cm) Square rear axle tubing: Heavy axle to handle harsh conditions.
Spring-cushioned center-axle: Protects unit from bumps and ground shock.
Replaceable wheel spindles: Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove two bolts to replace damaged spindle.
Bar-tite hitch (optional): Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Wheel options: Laminated tires: Eliminates flats. Airplane tires without foam filling: Better cushion while transporting. Airplane tires with foam filling: Better cushion while transporting and can't go flat.
Deck rings (optional): 1/2" (13 mm) x 3" (7.6 mm) Welded deck ring keeps blades from damaging the deck.
Shredder blades (optional): Ideal for cutting residue into smaller pieces. Replaces blade and stump jumper configuration.
Baffles (accessory): Maintains shredded material in each section of the cutter for a consistent discharge from the rear of each deck.

Specifications

Min. horsepower: 90 power take-off horsepower (67.1 kw)
Gearbox horsepower: 225 (167.8 kw) Center deck & wing decks
Gearbox lubrication & capacity: Center deck & wings: 10 pints (4.73 L) of gear lube 80-90W EP, Divider gearbox: 5.5 pints (2.60 L) of gear lube 80-90W EP
Cutting capacity: Up to 3" (7.6 cm) material
Machine weight: 7,340 lbs (3,329.4 kg)
Blade tip speed At 540 rpm: Center blade: 17,377 FPM (88.3 mps) & wing blade: 17,329 FPM (88 mps)
Tongue weight: 2,668 lbs (1,210.2 kg)
Hitch types: Standard clevis hitch, pintle hitch, ball hitch, LP performance hitch and bar-tite hitch
Hitch jack: Standard hand crank
Signal lights: LED (standard)
7 Pin connector: SAE J560 pin configuration
Cutting width: 20'-0" (6.10 m)
Overall width: 20'-10" (6.35 m)
Minimum transport width: 8'-9" (2.44 m)
Overall length: 19'-3" (5.87 m)
Deck height: 10 1/2" (3.06 m)
Lift hydraulics: 4" x 8" Hydraulic cylinder, hoses, fittings & stroke control spacers
Cutting height*: 2" (5.1 cm) to 14" (35.6 cm) with hydraulic cylinder and stroke control spacers
Wing hydraulics: 3 1/2" x 12" Hydraulic cylinders, hoses & fittings
Wing transport protection: Wing transport locks
Deck sheet thickness: 10g (3.4 mm) top and 10g (3.4 mm) bottom
Skid shoes: Wing decks: Replaceable and reversible; Center deck: Replaceable
Side skirt thickness: 1/4" (6 mm)
Blades - 6 (2 per carrier): 1/2" (13 mm) x 4" (10.2 cm) Heat-treated, free-swinging alloy steel with uplift
Blade overlap: 6" (16.2 cm)
Blade bolt: Keyed with hardened flat washer & locknut
Blade holder: 1" (2.5 cm) diamond shaped blade bar
Stump jumper: 3/16" (5 mm) Round dish shaped bolt-on stump-jumper (optional)
Deck rings (optional): 1/2" (13 mm) x 3" (7.6 cm) fully welded
Front & rear guards: Single chain or double chain
Heavy duty Input driveline options: Constant velocity u-joint ASAE Cat. 6 with or without over running clutch
Heavy duty Intermediate & wing drivelines: ASAE Cat. 5 with slip-clutch protection
Number of wheel: 6 - Wheel option: 4 on transport axle and one on each wing axle; 8 - Wheel option: 4 on transport axle and two on each wing axle
Tire & wheel options: 6" x 21" Laminated tires; 6" x 26" Laminated tires; 27" x 7.75" x 15" Used aircraft tires with foam filling; 29" Used aircraft tires
Transport axle: Spring-cushioned on center transport axle or optional walking tandem on center axle
Shredder blades (optional): Cuts material into smaller pieces
Hubs: Cast iron 5-bolt hubs with tapered roller bearings and with 1 3/4" (4.4 cm) shafts
Baffle Kit (optional): Front & rear mounted