2024 Land Pride RCF3010 Pull-type

Call for Price

Key Features

Availability Brochure

Year2024

MakeLand Pride

ModelRCF3010 Pull-type

Product Features

Description

The RCF3010 Dual-Spindle Rotary Cutter from Land Pride is the perfect medium-duty cutter for pastures and roadside applications. Available in 3-point, semi-mount or pull-type, the RCF30 features a 2.5" cutting capacity and 1/4" side skirts. Plus, every RCF3010 comes with the rugged dependability that Land Pride Rotary Cutters are known for.

Features

Surpassed Rugged Industry Standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
540 rpm: Fits wider variety of tractors.
High gearbox hp rating: Gearboxes are built rugged. See Specifications for actual Gearbox hp ratings
5 Yr. limited gearbox warranty: Shows our confidence in the gearbox integrity
3 Gearboxes: Allows equal torque to be spread to left and right gearbox
Splined rubber flex-couplers between the center and outboard gearboxes: Protects the driveline and gearboxes from hard objects in the blade path.
Pull-Type constant velocity driveline Option: Constant velocity driveline reduces chatter and extends life of U-joint during turns.
Slip-clutch protection on main driveline: Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
8'- Cat. 1 & 2 or 10'- Cat. 2 & 3 3-point & semi-mount hitches or pull-type hitch: Fits a wide range of tractors.; Semi-Mount and Pull-Type fit older tractors without a top link and smaller tractors without enough lift capacity.
10 Gauge deck, fully welded: Fully welded deck adds rigidity.
1/4" Thick sidewalls Protects sidewalls from thrown objects.
Round back design: Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out.
Pull-Type w/dual leveling rods: Dual leveling rods eliminate deck twisting when going over uneven terrain.
Chain or rubber guard option: Reduces flying debris.
Full length skids with replaceable shoes: Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece.
Splined blade hub: Splined blade hub offers tight non-slipping attachment to output shaft.
3/16" Round stump jumper: Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
1/2" x 4": Heat-treated blades Heat-treated blades last longer than non-heat-treated blades.
1" x 4" Blade bar: Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
2 1/2" Diameter cutting capacity: Aids in cutting brush.
High blade tip speed: Means cleaner cutting. See Specifications for actual blade tip speeds.
Laminated tires: Laminated tires can handle almost any condition and don't go flat.
Quick Hitch adaptable: 3-Point and semi-mount are Quick Hitch adaptable.

Specifications

Machine Weight (with Front And Rear Chain Shields): 2,214 lbs (1004 kg)
Pull Type Tongue Weight: 983 lb. (446 kg)
Cutting Width: 10' (3.05 m)
Overall Width: 10' - 7" (3.23 m)
Overall Length: 13' - 3" (3.99 m)
Cutting Height: 2" - 12" (5.1 - 30.5 cm)
Deck Height: 11 1/2" (29.2 cm)
Cutting Capacity: 2 1/2" (6.4 cm)
Tractor Hp Rating: 50 - 110 (37.3 - 82 kW)
Gearbox Horsepower Rating: T-box - 160 HP (119.3 kW), outboard 110 HP (82 kW)
Gearbox Lubrication: 80-90w EP gear lube
Gearbox: 540 rpm driven gearbox. Cast iron housing, beveled gears
Gearbox Oil Capacity End Boxes: Comer = 6 pints (2.84 L)
Gearbox Input/ Output Shaft Size: Input shaft = 1 3/4" - 20 spline, Output shaft = 2" Dia.
Gearbox Oil Capacity T-box: Comer = 4.5 pints (2.13 L)
Deck Material Thickness: 10 Gauge (3.4 mm)
Skids: Replaceable
Stump Jumper: 2 ea. - 3/16" (5 mm) Round pan
Blades (4): 1/2" x 4" Heat treated, Free-swinging suction blades
Blade Bolts: Keyed with harden flat washer and locknut
Blade Tip Speed: 540 rpm 17,100 fpm (86.9 mps)
Driveline: ASE Cat. 4 equal angle shaft or constant velocity u-joint
Driveline Protection: 540 rpm - 4 plate slip clutch
Wheel bearings: Tapered roller bearing in cast iron hub
Front guard Optional: Rubber deflector, single chain guard, or double chain guard
Shock absorption: Spring shock absorber on axle of semi-mount & pull type
Rear guard Optional: Rubber deflector, single chain guard, or double chain guard
Hitch: Category 1 & 2; Quick Hitch Adaptable
Park jack: Park jack attaches to the tongue of the pull type cutter
Tailwheel options pull-type w/single spindle: 2 tires: 6" x 9" x 21" Laminated or 24" x 7.7" recap foam filled aircraft or 29" x 16 ply aircraft
Tailwheel options pull-type w/dual spindles: 4 tires: 6" x 9" x 21" Laminated or 24" x 7.7" recap foam filled aircraft or 29" x 16 ply aircraft
Deck side skirt thickness: 1/4" (6 mm)