2024 Land Pride RCFM3610 Pull-type
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelRCFM3610 Pull-type
Product Features
Description
Land Pride's RCF3610 dual-spindle rotary cutter is an updated, flat-top version of the original RCR35. With larger gear boxes, larger cutting capacity, and a deeper deck, the RCF3610 is the ideal dual-spindle cutter for narrow areas in pastures, along roadsides, or in tree groves.
Features
- Surpassed Rugged Industry Standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
- 1000 rpm: Fits wider variety of tractors.
- High gearbox hp rating: Gearboxes are built rugged. See Specifications for actual Gearbox hp ratings
- 5 Yr. limited gearbox warranty: Shows our confidence in the gearbox integrity
- 3 Gearboxes: Allows equal torque to be spread to left and right gearbox
- Splined rubber flex-couplers between the center and outboard gearboxes: Protects the driveline and gearboxes from hard objects in the blade path.
- Pull-Type constant velocity driveline Option: Constant velocity driveline reduces chatter and extends life of U-joint during turns.
- Slip-clutch protection on main driveline: Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
- 8'- Cat. 1 & 2 or 10'- Cat. 2 & 3 3-point & semi-mount hitches or pull-type hitch: Fits a wide range of tractors. Semi-Mount and Pull-Type fit older tractors without a top link and smaller tractors without enough lift capacity
- 10 Gauge deck, fully welded: Fully welded deck adds rigidity.
- 1/4" Thick sidewalls Protects sidewalls from thrown objects.
- Round back design: Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out.
- Pull-Type w/dual leveling rods: Dual leveling rods eliminate deck twisting when going over uneven terrain.
- Chain or rubber guard option: Reduces flying debris.
- Full length skids with replaceable shoes: Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece.
- Splined blade hub: Splined blade hub offers tight non-slipping attachment to output shaft.
- 3/16" Round stump jumper: Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
- 1" x 5" Blade bar: Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
- 1/2" x 4": Heat-treated blades Heat-treated blades last longer than non-heat-treated blades.
- High blade tip speed: Means cleaner cutting. See Specifications for actual blade tip speeds.
- 3" Diameter cutting capacity: Aids in cutting brush.
- Laminated tires: Laminated tires can handle almost any condition and don't go flat.
- Quick Hitch adaptable: 3-Point and semi-mount are Quick Hitch adaptable
Specifications
- Machine Weight (with Front And Rear Chain Shields): 2,430 lb. (1102.2 kg)
- Pull Type Tongue Weight: 1087 lb. (493.1 kg)
- Cutting Width: 10' (3.05 m)
- Overall Width: 10' - 6 1/2" (3.21 m)
- Overall Length: 13' - 1" (3.99 m)
- Deck Height: 13" (33 cm)
- Cutting Height: 2" - 12" (5.1 - 30.5 cm)
- Cutting Capacity: 3" (7.6 cm)
- Tractor Hp Rating: 50 - 130 HP (37.3 - 96.9 kw)
- Gearbox Horsepower Rating: T-Box - 210 hp (156.6 kw), outboard 205 hp (152.9 kw)
- Gearbox: 540 rpm driven gearbox. Cast iron housing, beveled gears
- Gearbox Lubrication: 80-90w EP
- Gearbox Oil Capacity End Boxes: 5.5 pints (2.60 L), Comes = 10 pints (4.73 L)
- Gearbox Input/ Output Shaft Size: Input shaft = 1 3/4" (4.4 cm), Output shaft = 2 3/8" (6 cm) Dia.
- Gearbox Oil Capacity T-box: Comer = 4.5 pints (2.13 L)
- Deck Material Thickness: 10 Gauge (3.4 mm)
- Skids: Replaceable
- Blades (4): 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated Free-swinging suction blades
- Stump Jumper: 2 ea. - 3/16" (5 mm) Round pan
- Blade Bolts: Keyed with harden flat washer and locknut
- Blade Tip Speed: 17,400 fpm (88.4 mps)
- Driveline Protection: 2 plate slip clutch, Rubber flex coupler to wing boxes
- Driveline: ASE Cat. 4 equal angle shaft or constant velocity u-joint
- Tailwheel w/single spindle: 2 tires: 6" x 9" x 21" Laminated or 24" x 7.7" recap foam filled aircraft or 29" x 16 ply aircraft
- Park jack: Parking jack attaches to the tongue of the pull type cutter
- Shock absorption: Spring shock absorber on axle of semi-mount & pull type
- Wheel bearings: Tapered roller bearing in cast iron hub
- Front guard Optional: Rubber deflector, single chain guard, or double chain guard
- Rear guard Optional: Rubber deflector, single chain guard, or double chain guard
General
| Working Width | 10 ft. (3.05 m) |
| Width | 10 ft. - 6 1/2 in. (3.21 m) |
| Length | 10 ft - 2 in. (3.10 m) |
| Weight | 2,270 lb. (1029.7 kg) |
| Recommended HP | 50 - 130 HP (37.3 - 96.9 kw) |
