2024 Land Pride RCFM3696 Pull-type
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelRCFM3696 Pull-type
Product Features
Description
The RCFM3696 is a heavy-duty dual spindle cutter with a 3" cut capacity. This rotary cutter is made for pasture maintenance, roadside mowing, and land clearing in reclamation projects. The 210 gearboxes are protected from damage by the slip clutch on the main driveline and impact absorbing flex couplers on the connecting drivelines. The features on this unit add up to a bigger, better cutter.
Features
- Surpassed Rugged Industry Standards: All Land Pride cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI.
- 1000 rpm: Fits wider variety of tractors.
- High gearbox hp rating: Gearboxes are built rugged. See Specifications for actual Gearbox hp ratings
- 5 Yr. limited gearbox warranty: Shows our confidence in the gearbox integrity
- 3 Gearboxes: Allows equal torque to be spread to left and right gearbox
- Splined rubber flex-couplers between the center and outboard gearboxes: Protects the driveline and gearboxes from hard objects in the blade path.
- Pull-Type constant velocity driveline Option: Constant velocity driveline reduces chatter and extends life of U-joint during turns.
- Slip-clutch protection on main driveline: Slip-clutch is more convenient than shear-bolt, protects gearbox against sudden impact.
- 8'- Cat. 1 & 2 or 10'- Cat. 2 & 3 3-point & semi-mount hitches or pull-type hitch: Fits a wide range of tractors.; Semi-Mount and Pull-Type fit older tractors without a top link and smaller tractors without enough lift capacity.
- 10 Gauge deck, fully welded: Fully welded deck adds rigidity.
- 1/4" Thick sidewalls Protects sidewalls from thrown objects.
- Round back design: Allows for cleaner and efficient discharge of material, helps eliminate damage to rear corners by not sticking out.
- Pull-Type w/dual leveling rods: Dual leveling rods eliminate deck twisting when going over uneven terrain.
- Chain or rubber guard option: Reduces flying debris.
- Full length skids with replaceable shoes: Adds reinforcement to side panels. Replaceable shoes allow for change before wearing through to weld-on piece.
- Splined blade hub: Splined blade hub offers tight non-slipping attachment to output shaft.
- 3/16" Round stump jumper: Standard stump jumper aids in sliding over obstructions, which helps protect gearbox output shaft.
- 1" x 5" Blade bar: Heavy-duty blade bar adds support to stump jumper as well as gearbox output shaft.
- 1/2" x 4": Heat-treated blades Heat-treated blades last longer than non-heat-treated blades.
- 3" Diameter cutting capacity: Aids in cutting brush.
- High blade tip speed: Means cleaner cutting. See Specifications for actual blade tip speeds.
- Laminated tires: Laminated tires can handle almost any condition and don't go flat.
- Quick Hitch adaptable: 3-Point and semi-mount are Quick Hitch adaptable
Specifications
- Machine Weight (with Front And Rear Chain Shields): 2,090 lbs (948.0 kg)
- Pull Type Tongue Weight: 933 lbs (423.2 kg)
- Cutting Width: 8' (2.44 m)
- Overall Width: 8' - 7' (2.62 m)
- Overall Length: 12' - 5" (3.78 m)
- Cutting Height: 2" - 12" (5.1 - 30.5 cm)
- Deck Height: 13" (33 cm)
- Cutting Capacity: 3" (7.6 cm)
- Gearbox Horsepower Rating: T-Box - 210 hp (156.6 kw), outboard 205 hp (152.9 kw)
- Tractor Hp Rating: 35 - 130 HP (26.1 - 96.9 kw)
- Gearbox: 540 rpm driven gearbox. Cast iron housing, beveled gears
- Gearbox Lubrication: 80-90w EP
- Gearbox Oil Capacity End Boxes: 5.5 pints (2.60 L), Comes = 10 pints (4.73 L)
- Gearbox Oil Capacity T-box: Comer = 4.5 pints (2.13 L)
- Deck Material Thickness: 10 Gauge (3.4 mm)
- Gearbox Input/ Output Shaft Size: Input shaft = 1 3/4" (4.4 cm), Output shaft = 2 3/8" (6 cm) Dia.
- Skids: Replaceable
- Stump Jumper: 2 ea. - 3/16" (5 mm) Round pan
- Blades (4): 1/2" x 4" (1.3 cm x 10.2 cm) Heat treated Free-swinging suction blades
- Blade Bolts: Keyed with harden flat washer and locknut
- Blade Tip Speed: 17,400 fpm (88.4 mps)
- Driveline: ASE Cat. 4 equal angle shaft or constant velocity u-joint
- Driveline Protection: 2 plate slip clutch, Rubber flex coupler to wing boxes
- Tailwheel w/single spindle: 2 tires: 6" x 9" x 21" Laminated or 24" x 7.7" recap foam filled aircraft or 29" x 16 ply aircraft
- Park jack: Parking jack attaches to the tongue of the pull type cutter
- Wheel bearings: Tapered roller bearing in cast iron hub
- Shock absorption: Spring shock absorber on axle of semi-mount & pull type
- Front guard Optional: Rubber deflector, single chain guard, or double chain guard
- Rear guard Optional: Rubber deflector, single chain guard, or double chain guard
- Tailwheel w/single spindle: 4 tires: 6" x 9" x 21" Laminated or 24" x 7.7" recap foam filled aircraft or 29" x 16 ply aircraft
General
| Working Width | 8 ft. (2.44 cm) |
| Width | 8 ft - 7 ft. (2.62 m) |
| Length | 12 ft. - 5 in. (3.78 m) |
| Weight | 2,090 lb. (948.0 kg) |
| Recommended HP | 35 - 130 HP (26.1 - 96.9 kW) |
