2024 Land Pride RCM3715
Call for Price
Key Features
Availability
Brochure
Year2024
MakeLand Pride
ModelRCM3715
Product Features
Description
Land Pride's RCM3715 is identical to the RC3712, simply 3 feet wider. The tire offering on the RC3715 is expanded to 4, 6, or 8 tires in 4 sizes, including our new 26" laminated tire. Deck rings are available as well as fold options that allow for narrow transport or independent control of the wings. Also available as an RCG3715 model that offers a hot-dipped zinc galvanized deck.
Features
- Surpassed rugged industry standards: All Land Pride Rotary Cutters have been designed and tested and meet rigorous: voluntary testing procedures according to ISO 4254-13.
- Factory assembled: Arrives for quick and easy set-up. Minimal time wasted setting or prepping the unit.
- 5 Year gearbox warranty: Shows confidence in gearbox integrity.
- Rugged heavy built gearboxes: Capable of handling heavy cutting applications.
- Gearbox seal protection: Gearbox bottom seal protection for longer bearing life.
- 2 Piece driveline: shields Driveline grease zerks are easier to access.
- Low hitch weight on tractor tongue: Ideal for smaller hp tractors by reducing the amount of weight on the drawbar.
- Narrow A-frame hitch: Allows for a tighter turning radius.
- Adjustable park jack angle: Park jack can be adjusted to be perpendicular to the ground.
- Adjustable driveline hanger: Serves as support rest for the driveline when the cutter is unhooked from the tractor. Assist operator when attaching driveline to tractor power take-off shaft.
- Input driveline: Cat. 6 CV: Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
- Drivelines with slip-clutches: Cat. 4 intermediate, Cat. 4 or Cat. 5 wings. Driveline is sized right for the intended cutting capacity. Slip-clutches will slip under load to minimize twist damage to driveline profiles.
- Grease zerks on end caps of driveline: Intermediate and wing driveline cross journals are easier to grease.
- High blade tip speed: Allows clean cutting of material.
- 6" Blade overlap: Eliminates skipping during turns.
- 3/16" Round stump jumper: Standard thick stump jumper material keeps damage to a minimum.
- Smooth top design: Reduces accumulation of debris and is easier and faster to clean.
- 1/4" Sidewall thickness: Increased thickness reduces damage from objects being thrown into deck sidewalls.
- Tops of decks are 100% welded: Makes center decks and wing decks stronger.
- Beveled skid shoes on wings: Reduces gouging the ground when turning.
- LED signal lights: LED lights are bright, long lasting, and resist vibration, unlike incandescent lights.
- 1" Solid hinge rods: Larger diameter hinge rod provides greater strength in the hinge area.
- Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
- Wing transport lock pins: Transport lock pins will hold wings in folded position in the event of hydraulic loss.
- Enclosed dual 1" leveling rods: Cutter pulls equally on the rear axle while traveling over rough terrain.
- 5-Bolt hubs: 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
- Drain holes in wheel rims: Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.
- Spring cushioned center-axle: Protects unit from bumps and ground shock.
- Replaceable individual wheel spindles: Spindles can be replaced when damaged without replacing entire axle assembly.
- Wheel options: Laminated tires: Eliminates flats; Air-filled tires: Give better cushion while transporting; Foam-filled tires: Give better cushion while transporting and can't go flat.
- LP Performance hitch option: Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
- Bar-tite hitch option: Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
- Maintenance free tongue & axle pivots: Self lubricating journal bearings make for less maintenance.
- Color coded hydraulic hose handles: Easy hose identification & sturdy handle to easily connect & disconnect from tractor.
- 4 lip purgeable metal backed wheel hub seal: Seals make it harder for water & debris to enter the hub and grease to leave the hub. Metal backing prevents sticks and twine from destroying the seal lips.
- Greasable cast steel continuous hinge: Cast steel hinges make a strong connection & are easy to lubricate.
Specifications
- Horsepower range: 50 - 160
- Gearbox lubrication: Gear Lube 80-90W EP
- Gearbox horsepower: 540 rpm or 1000 rpm, 160 hp Divider and 130 hp Center & Wings
- Gearbox oil capacity: Splitter: 3.5 pints; Center deck & Wings: 6 pints
- Cutting capacity: 3"
- Tongue weight:1,594lbs.
- Machine Total weight:4,380 lbs.
- Blade tip speed At 1000 rpm: Center Blades = 15,578 FPM & Wing Blades = 14,620 FPM
- Hitch types: Fixed Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
- Signal lights: LED
- 7 Pin connector: SAE J560 pin configuration
- Cutting width: 15'
- Overall width: 15'-10"
- Transport width with 21" tires: 10'-3" (Single acting fold option) 7'-3" (Dual acting fold option)
- Deck height: 12"
- Overall length: 16'-3" (With center deck raised fully up)
- Cutting height: 1-1/2" - 16" (Varies by tire option)
- Lift hydraulics: 3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers
- Wing hydraulics: 2 1/2" x 12" hydraulic cylinders, hoses & fittings
- Wing transport protection: Wing Transport Lock Pins
- Deck material thickness: 10 Gauge
- Side skirt thickness: 1/4" Steel
- Skid shoes: Wing Deck: 1 Replaceable skid shoe per wing
- Skid shoes: Center Deck: 2 Replaceable skid shoes
- Blades - 6 (2 per carrier): 1/2" x 4" Heat-treated Skid shoes, free-swinging alloy steel with uplift.
- Blade bolt: Keyed with hardened flat washer & locknut
- Blade overlap: 6"
- Stump jumper / blade holder: 3/16" Thick round dish shaped pan, reinforced with 1" x 4" blade bar
- Front & rear guards: Optional single row chain or dual row chain
- Input driveline: 540 & 1000 rpm Cat. 6 with constant velocity u-joint with or without overrunning clutch
- Intermediate driveline: Standard - Category 4 with slip-clutch
- Wing drivelines: Standard - Category 4 with slip-clutch or Category 5 with slip-clutch
- Wheel options: 21" or 26" Laminated tires; 25.5" New foam filled tires; 25.5" New 20-ply pneumatic tires; 29" Used aircraft tires
- Number of wheels; 4 - Wheels: Two on transport axle and one on each wing axle; 6 - Wheel option: Four on transport axle and one on each wing axle; 8 - Wheel option: Four on transport axle and two on each wing axle
- Transport axle: Spring-cushioned on center transport axle
- Hubs: Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts
- LP Performance hitch & Bar tite hitch pivot shaft diameter: 2 1/4"
- A-frame tongue: 5" x 3" rectangular tubing
- Hitch jack: Standard (7,000 lbs.)
General
| Working Width | 15 ft. |
| Width | 15 ft. 10 in. |
| Length | 16 ft. 3 in. |
| Weight | 4,380 lb. |
| Recommended HP | 50 - 160 HP |
