2024 Land Pride RCP2760

Call for Price

Key Features

Availability Brochure

Year2024

MakeLand Pride

ModelRCP2760

Product Features

Description

Land Pride's Hydraulic Parallel Arm Rotary Cutters provide a safe and efficient method for cutting ditch banks, pond dams, and other sloping areas adjacent to rights-of-way, lakes, ponds, or streams. They also work well for maintaining snowmobile paths or wooded lanes and roads. The RCP's self-contained hydraulic system requires only one set of hydraulic remotes on the tractor and is available in a Float or No-Float option. Also available is an option utilizing the tractor's hydraulic system and requires 4 remotes. The optional gauge wheels allow the deck to glide over undulations and rolling terrain without the operator having to constantly monitor ground conditions.

Features and Benefits

Tractor hp Range RCP(M)2760: Designed for 75 minimum hp tractor with minimum weight of 8,000 lbs. (3629 kg)
Gearbox hp Rating: 150 hp
3 Point Design: Does not tie up a tractor. Three point hook up is easy to hook up and remove from tractor.
Cutter Deck Visibility: Visibility of the cutter deck is captured from the operator's seat. Easy to see operation.; Operator does not have to look behind.
Factory Assembled: Arrives ready for the customer, saves time and money. (Excluding fluids).
Grease Ports: All grease ports are easily accessible for servicing.
10' Transport Width: Folds up close to the tractor. No weight brackets or decks hanging away from the tractor.; Typically, not much wider than the tractor, which means safer transporting.
Parallel Arm Design: Three cylinders used in a parallel arm design allows any cylinder to be adjusted without changing the position of the others. Means less positioning.
Long Horizontal Reach RCP(M)2760 = 15'-6" (4.72 m): Good access for reaching vegetation far away from the tractor.
Above Grade Vertical Reach RCP(M)2760 = 11'-5" (3.47 m): Good access for reaching up embankments and cutting low over hanging limbs.
180 Degree Operating Tilt Arc: Cutter head can be positioned to reach different angles.
Below Grade Reach RCP(M)2760 = 9'-1" (2.76 m): Good access for reaching down embankments.
Cat. 2 & 3; 540 or 1000 rpm: Fits a wide variety of tractors.
40 Gallon Oil Reservoir: Large reservoir maintains optimum fluid temperatures and also serves as counterweight.
2" Cutting Capacity: Ideal for trimming brush.
High Blade Tip Speed: 15,000 fm tip speed means cleaner cutting.
Two Parking Stands: Easy and level storage, makes it easy for hooking to tractor.
In-line Filter: Cleans hydraulic fluid before it re-enters the reservoir.
Shut-off Valve: Permits maintenance with minimum oil loss.
Oil Pressure Gauge: Easily monitor oil pressure for optimum performance of unit.
Hydraulic Breakaway: Allows the parallel arms to pivot backwards to avoid obstacles and to protect cutter deck and parallel arms. Parallel arms are pivoted back to normal operating position with the hydraulic breakaway cylinder.
Gauge Wheels Option: Decks on gauge wheels eliminating frequent deck positioning and vigilant watch for changes in ground contour under the tractor and deck.
Kubota 3-Point Stabilizer Kit: Makes the RCP2760 Parallel Arm Rotary Cutter a match fit for Kubota tractor model numbers M126GX, M135GX, M6-141, and M6-141.
Independent Control Option (Self-Contained Hydraulics): Self contained hydraulic system eliminates the tractor/RCP hydraulic incompatibility. This option uses the RCP hydraulic system to operate the cutter.
Slow Moving Vehicle Mounting Socket (Standard): Mounting socket receives most slow moving vehicle signs equipped with a mounting blade for ease of attachment and removal when transporting on a truck or trailer.
Slow Moving Vehicle Sign (Accessory): Slow moving vehicle sign is offered as an accessory when the tractor's slow moving vehicle sign and mounting blade does not fit the cutter's standard mounting socket.

Specifications & Capacities

Power Take-Off Input Speed: 540 rpm
Deck Motor rpm @Power Take-Off Speed: 1000 rpm @ 540 power take-off
Minimum Tractor Horsepower: 75 hp (55.9 kW)
Weight: 3090 lbs (1401 kg) (No fluid and without gauge wheels)
Minimum Base Tractor Weight: 8,000 Lbs. (3629 kg) without added weights
Cutting Width: 60" (152 cm)
Overall Width (Fully Extended): 19'-9" (6 m)
Minimum Cutting Height (Deck Level): 2" (5 cm)
Transport Width: 10' (3 m) (without gauge wheels)
Maximum Horizontal Reach from Center Tractor: 15'-6" (4.4 m)
Maximum Vertical Reach (Above Horizontal): 11'-5" (3.5 m)
Deck Rotating Arc: 180 Degrees
Maximum Vertical Reach (Below Horizontal): 9'-1" (2.8 m)
Blade Tip Speed: 15,000 fm (76 mps)
Blade Size: 1/2" x 4" (1.3 cm-10.2 cm)
Blade Rotation: Clockwise
Blade Bolt: 1 1/2" (3.8 cm) With keyway; nut
Dishpan: 3/16" X 24" (.48 x 61.0 cm) Round, dish shaped
Cutting Capacity: 2" Max. (5 cm)
Deck Thickness: 10 GA (3.4 mm)
Speed Increaser Fluid Capacity: 1 Pint (.47 L)
Speed Increaser Fluid: 80-90W EP Gearlube
Hydraulic Fluid: Mobilfluid 424; For alternate fluids, search on the web for "Mobilfluid 424" or go to www.mobil.com
Reservoir Capacity and Filter: 40 Gallons / Conventional 10 Micron Filter
Hydraulic Fluid Flow Rate: Approximately 15 gpm or 56.8 L/min.
Overload Protection: Hydraulic relief valve
Breakaway Protection: Hydraulic Cylinder
Hitch: 3-Point Cat. 2 & 3 with clevis style lower hitch, Quick Hitch adaptable except with M126GX, M135GX, or M6-141 Kubota tractors
Driveline: ASAE Category 2
Skid Shoes: 1/4" (.63 cm) Reversible

Gauge Wheel Option

Gauge Wheels: Three 13 x 5.00 - 6 Semi-solid smooth tires with greasable caged roller bearings
Height Adjustment: Two Ratchet jacks

Hydraulic Control Options

Options: Tractor Control; Independent Control With or Without Deck Float

Optional & Accessory Equipment

Kubota 3-Point Stabilizer Kit: Available
Operator Protective shield: Extruded aluminum frame and glazed with 1/4" clear lexan polycarbonate
SMV Sign (Accessory): Slow moving decal on galvanized steel back sign and plated or galvanized mount